Main Menu

Brakes

Free a seized drum brake

Model: 356 B S90, Year:1963, Mileage:300000, Type of use:Street use only
How to remove a seized 356B T6 brake drum?

center tunnel brake line

Model: 356C, Year:1964, Mileage:?166K, Type of use:Street use only
I am replacing the center tunnel brake line on a 64 C coupe that was a pile of parts when I purchased it. I have the grommetts for the ends of the line where they pass trhough the fire walls but it would seem likely that the line is fastened down somewhere inside the tunnel but I can find no info. Help please I don't want to have it moving around and causing wear inside the tunnel.Car is a bre shell now and am starting to put it together fulfilling a lifelong dream of restoring one completely. Thanks Doud

Momentary brake pull

Vehicle Information: Model: 912; Year: 1967; Body Type: Coupe; Engine (type, size, modifications): 1600; Total Mileage: lots;

Disc Brakes

Vehicle Information: Model: 356A; Year: 1958; Body Type: Coupe; Engine (type, size, modifications): 1600; Total Mileage: 104000;

I would like to install a front disc brake kit on my drum-brake 356 such as part #914530 from Performance Products. Please comment on the conversion and the kit if you are familiar with it. Also, if you are aware of other kits I would appreciate the vendor information so that I may compare.

Brake pedal height

Vehicle Information: Model: 912; Year: 1968; Body Type: Coupe; Engine (type, size, modifications): 1.6; Total Mileage: 103k;

Odd Brake Noise

Vehicle Information: Model: 356C; Year: 64; Body Type: Coupe; Engine (type, size, modifications): 1600; Total Mileage: 10;

Dual Master Cylinder

Vehicle Information: Model: 912; Year: 1966; Body Type: Coupe; Engine (type, size, modifications): built 1750; Total Mileage: 1000;

I was wondering if you could give me your opinion on installing a dual master brake cylinder system in my 1966 912? I think I would feel a little more comfortable and safer with this type of system. Your opinion please.

912E Brakes

Vehicle Information: Model: 912E; Year: 1976; Body Type: Coupe; Engine (type, size, modifications): 2.0; Total Mileage: 128000;

I am rebuilding the brakes on my 912E. I was wondering, Since 912E parts are very hard to find, could 911 calipers and rotors be installed on the 912E? What are the parts that would need to be replaced or modified? Has this been done before?

912E Brake Calipers

Vehicle Information: Model: 912E; Year: 1976; Body Type: Coupe; Engine (type, size, modifications): stock 4 cylinder; Total Mileage: 171,000;

Subscribe to RSS - Brakes