Main Menu


Engine Rebuild

Model: SC, Year:1978, Mileage:155000, Type of use:Both Street & Track
I have a 3.2 which has been converted to a 3.4 Turbo and I am in the middle of an engine rebuild. I am about to order the required replacement parts, etc. and am wondering about the quality of Glyco main bearings vs. buying from a Porsche dealer. the car will also be tracked at times.Thanks,JC

86 911 Turbo : Advice & Wisdom Requested

Model: 911 Turbo, Year:1986, Mileage:77,000, Type of use:Street use only

#1 cylinder

Model: 996TT, Year:2003, Mileage:22000, Type of use:Both Street & Track
just curious since there is not a sticker on the engine like the old 911. Did Porsche change the location of #1 cylinder when the engine changed from air to water cooled in 911? The air cooled 911 has #1 cylinder at the left rear.What about the Boxster/Cayman since the engine is the other way around?Thanks!William

'91 C2 Turbo won't run when warm

Model: C2 Turbo, Year:1991, Mileage:24000, Type of use:Street use only

How many miles in life span of 2011 turbo engine?

Model: 911 turbo S, Year:2011, Mileage:1400, Type of use:Both Street & Track
Average life in miles expected of new turbo engine?

engine problem with 1 bar boost spring

Model: 930 Turbo, Year:1987, Mileage:67K, Type of use:Street use only

twin plugs on 1988 3.3L

Model: 930, Year:1988, Mileage:110K, Type of use:Street use only
Do you know of any issues with 3.3L being converted to twin plugs. Car I am looking at is a 1988 930 that has this mod. The ign is using a cap & rotors that has double contacts. Any insight you might have would be appreciated.

Hard Starting

Model: 930, Year:1987, Mileage:120000, Type of use:Street use only

Replacing belt

Model: 911 Turbo, Year:2003, Mileage:52000, Type of use:Street use only
I need to replace my serpintine drive belt, I removed the air cleaner to get to the belt however it looks really tight!! Are there instructions to remove and replace belt and check pulleys?I think the center pully is the tentioner and once I get the belt loose will I be able to remove it from the top and fish in the new belt?Ken


Subscribe to RSS - Engine