Body

Got hit by hit and split at stop light! Dented driver side bumper end cap. Question is what is it made off and can it  straighten out? Or can heat be applied and dent removed.

Hi Everyone, 

This is my first post so bear with me.  I have a 1985.5 944 that is in great condition, with the exception of the removable roof.  When closed, the center back is about 7mm above the rest of the body.  It doesn't seem to leak water when washed, but if I drive with the windows closed and the roof shut, it whistles.  So I guess it is simply esthetically an issue, as well as an annoyance.  Any thoughts on 'flattening it out'?  I have tried gently setting weight on top of it in my hot garage with no luck.  Thanks!

-Wes

My '85 944 has a Satatoga glass top. It wont open by pressing the swich. When I eventually get it open, can I use new factory seals with this roof?

Thanks,

Dave Durrell

how to tuck the front bumper on a 1984 944?  i WANT THE RECESSED LOOK as on some 944 turbos

Model: 944, Year:1985, Mileage:80000, Type of use:Track use only
I cannot find a step-by-step guide on how to remove the ac/heater blower from inside the car. The car is used for track events only. Any help would be greatly appreciated.

Model: 944 Turbo, Year:1986, Mileage:54,000, Type of use:Street use only
I need to replace one of the engine hood shocks. Is this a one man or two man job. I am good with tools and worked around cars quite a bit.

Model: 944, Year:1983, Mileage:150k, Type of use:Street use only

Model: 944, Year:1985, Mileage:130000, Type of use:Track use only
Where are the 4 best placements for jackstands.

Model: 944 Turbo, Year:1986, Mileage:150k, Type of use:Street use only
I have an 1986 951 and have removed the hood insulation on the underside of the hood. I have noticed that the paint on the outside of the hood has been fading in various spots. I believe the fading started before I removed the hood insulation. Is there any reason to believe that the lack of the hood insulation is contributing to the fading of the paint on the outer side of the hood?

Model: 944, Year:1985, Mileage:85K, Type of use:Street use only
My wife backed into the front of my 85 944. My bumper now is now out of alignment approximately 1.5"- collapsed on one side extended on the other. Is this an easy part re-adjustment or a replacement? Can I make her do it?