Main Menu

Transmission

Clutch pedal going half way down and stopping

I have a 1985/2 944 that sat for years.  When I purchased it 2 months ago,  the car did not run.  The clutch pedal and clutch seemed to operate as expected.  I have rebuilt the calibers etc.

Clutch rebuild

Model: 944, Year:1983, Mileage:45000, Type of use:Street use only
I have owned my 1983 944 since new. It has only 45000 original miles. My question is, if the clutch is performing well, should I leave it alone or should it be rebuilt due to it's age?Thanks

ratios

Model: 944, Year:1984, Mileage:180K, Type of use:Street use only
What are the final drive ratios of the 1984 944 transaxle and 944 Turbo transaxle?

ratio

Model: 944, Year:1984, Mileage:180K, Type of use:Street use only
Can a 944 Turbo transmission be dropped into a 1984 944 5 speed, and what parts may need to be changed?

ingnition lock tumbler replacement

Model: 944, Year:1984, Mileage:85000, Type of use:Street use only
I am trying to replace the ignition system in my 944 Porsche. I have the ignition assembly apart. I was wondering if there is a diagram, or description, as to how to take out & reinstall the entire lock/tumbler system. I have a replacement one that I got from a scrap yard, but I am uncertain as to how it is replaced properly. Any advice please?

Rusty area under transmission

Model: 944, Year:1985, Mileage:73456, Type of use:Street use only
I have an 85.5 944. Just perchased. Under transmission there is a plate that is kind of rusty. It has a tube that comes up to a cap that is removable. Can this plate be replaced?

New clutch problems

Model: 951, Year:1986, Mileage:145000, Type of use:Both Street & Track

best tranny fluid

Model: 94, Year:1984, Mileage:90.000, Type of use:Street use only
if i remove the dino oil and use ,say a sweepco synthetic oil .will my tranny quiet down on decel? and maybe last longer?

drive shaft keeps slipping out of place inside transmission?

Model: 944, Year:1983, Mileage:84000, Type of use:Street use only
I recently picked up an 83' 944 (not turbo) and the transmission keeps giving me problems. The drive shaft wont stay aligned inside the transmission. The car drives great when running, but once this problem happens it won't go into gear and makes a loud squealing/grinding sound when i do go into gear. this has happened 3 times this summer so i know how to fix it so it holds, just wondering if anyone else is having the same problem and has a solid solution that will last a while.thanks

automatic shifting

Model: 944, Year:1986, Mileage:160000, Type of use:Street use only

Pages

Subscribe to RSS - Transmission