Main Menu

Suspension

M030 with Euro Springs for Boxster REVISED

Vehicle Information: Year: 2000; Engine (type, size, modifications): 2.7L, non-M030 suspension; Total Mileage: 60,000;

Squeeky Suspension

Vehicle Information: Year: 1999; Engine (type, size, modifications): 2.5liter; Total Mileage: 100,050;

About 1 year ago I had all four struts replaced. They have performed well. In the last week or so, I have developed an annoying squeek mostly from the front end at low speeds. When stopped, I push down on fenders and it produces same squeek. Lesser squeek coming from rear. Do you know what may cause this noise or what I should check? Is is possible something is loose? Car had wheels aligned recently. No noticeable driving impact. Thanks.

Boxster front camber

Vehicle Information: Year: 2003; Engine (type, size, modifications): 3.2L; Total Mileage: 6,000;

Alignment settings for ROW 030

Vehicle Information: Year: 2002; Engine (type, size, modifications): 2.7L; Total Mileage: 22,000;

It's time for an alignment on my Boxster and I wanted to see what is recommended for my suspension.I have a 2.7L Boxster with the ROW 030 installed. I have been unable to find the suggested alignment for this suspension setup. Furthermore, I have heard it only provides a wide range.I use the car as a daily driver but also participate in numerous DE's. Any suggestions as a compromise between tire life and an aggressive setting?Thanks

Suspension Noise

Vehicle Information: Year: 1999; Engine (type, size, modifications): 2.5 w/TPC supercharger,H&R lowering springs,H&R 26/23 mm sway bars,short shifter; Total Mileage: 68,000;

front end noise during low speed turn

Vehicle Information: Year: 2003; Engine (type, size, modifications): 2.7; Total Mileage: 17300;

intermittent noise when turning at low speed . does the front end require scheduled grease of fittings ?if the top struts are know to make noise as indicated in a prior response , can this be corrected . i have a scheduled maintenance in 2weeks what should the dealer focus on ? thanks

CV joints

Vehicle Information: Year: 2000; Engine (type, size, modifications): stock S engine; Total Mileage: 60000;

How are the outer CV joints disassembled for cleaning and regreasing. The inner joints were fairly straight forward to rebuild but I have not figured out how to dismantle the outer joints without possibly breaking something.Thank youDean

1999 Boxster Wheel Upgrade

Vehicle Information: Year: 1999; Engine (type, size, modifications): 2.5L; Total Mileage: 10,200;

Installed a new set of 18" wheels and tires: Front 225/40; Rear 285/30 Pirelli Asymetricos. Springs are H&R Sport. Rear tires how have mild rub with harsh road conditions, dips, etc. Best way to raise rear about 1/2" to 1"? Should I consider coil-overs?

Front and Rear Strut Braces

Vehicle Information: Year: 2004; Engine (type, size, modifications): 2.7 Stock; Total Mileage: 2075;

Is it worth mounting front and rear strut braces on an 04 Boxster with 2K miles on it. Will it improve the handling? Is is difficult to install? Any thoughts.

2003 Boxster S alignment

Vehicle Information: Year: 2003; Total Mileage: 300;

Pages

Subscribe to RSS - Suspension