Main Menu

1979 930 horn connection in steering hub adapter

Electrical

Vehicle Information: Year: 1979; Engine (Size, Modifications): 3.3; Total Mileage: 47000;

Four months ago I replaced my stock steering wheel with an after-market one (with momo hub-adapter) and sold the stock one on ebay. I had to jury-rig the horn cornnection (by running/connecdting the hot horn wire coming out of the steering column directly to the horn button) on the new one since the horn-ring went with the stock one and the momo hub adapter did not have a horn/cancel ring. This also left me with having to manually operate my turn signals). Not satisfied with the after-market steering wheel, I just installed a brand new 930S steering wheel with hub adapter by AJ-USA Inc., which I purchased from ebay. The hub adapter has a cancel ring and two wires (hot and ground) which connect to the horn contact ring. My problem is, I don't know where to connect the hot horn wire that comes out of the steering column. Consequently, while my turn signals now operates properly, the horn does not function.

You must log in to view answers associated with technical questions. Join PCA to participate in our community.
0
No votes yet