Main Menu

1995 993 electrical question

Electrical and Electronic

Vehicle Information: Year: 1995; Body Type: Coupe; Total Mileage: 38,000;

I am in the process of putting a 993 into my S 81 SC. I have a ' 95 993 motor with a euro harness. As I looked at the harness I found five black wires coming out near the 55 pin DME plug. It looked as though someone may have hacked into the harness as these black wires are not connected to anything. I traced them ino the harness and found that two of them go to pin numbers 4 and 11 on the large connector (next to the DME 55 pin connector). I have one of the black wires connecting to a yellow/green wire which goes to DME pin 36. According to my pinout sheet which identifies the pins and where they go, it looks like it goes to "ground, DME relay 85"The next black wire connects to a black/white wire which connects to DME pin 3 - according to the pinout sheet this would be for "ground, DME relay" and the last black wire goes to a black/maroon wire which goes to DME pin 45 which is listed as "Engine NTC II" My question is, what are these wires for? Why would they have been tampered with?

You must log in to view answers associated with technical questions. Join PCA to participate in our community.
No votes yet