Main Menu



Vehicle Information: Model (914/4, 914/6): 914/6; Year: 1973; Engine (type, size, modifications): 3.0L; Total Mileage: 200,000+;

Hello there...Several years back I had George Vellios convert my 914 rear control arms to 911 hubs. I'm now close to bolting everything together and find that the rear caliper appears to be spaced too far out from the control arm, causing the mounting tabs on the caliper to be at exactly the same location as the mounting tabs on the control arm. The rotors that I have are 286mm in diameter, and one possibility is that I have the wrong rotors. Is there a source for the rotors that are supposed to be used with Vellios rear control arms and/or a list of 911 rear rotor specifications (backspacing, dia, thickness). I have tried finding George but the two numbers that I had do not seem to be in operation any longer. Thanks very much for your help,Alan Thomason

You must log in to view answers associated with technical questions. Join PCA to participate in our community.
No votes yet