Main Menu

944S Engine installed in a 924S

Other

Vehicle Information: Model(924/944/968): 924; Year: 1987; Body Type: Coupe; Total Mileage: 140000;

I am hoping that you can give me some advice.. I have installed a engine from a 944S into my 924S and am at the point of hooking up the wiring for the engine to chassis connection. The plugs were different but most of the wires were the same color combination. I unhooked them from the plug ins and just connected the wires separately. The engine wiring harness was retained and the computer for the engine installed is used. I have power to the ignition coil, but no spark. The 944 had only one crank sensor, the 924S two. I installed the engine (which was running) with the same flywheel, bellhousing, and clutch that was on it so the triggers are the same as before.The power steering pump on the 944s had a pressure switch on it, with a blk/yellow wire, red/yellow and red/blue, I did not install that pump. The engine wiring harness has a red/green, blue/green, and red wire extra. The body harness has a red/black extra. All the other wires had a color match and I assumed they would go together. I cannot seem to find a reasonably priced diagram for either model. If you can give any advice I will be eternally endebted to you. Thanks for any advice.

You must log in to view answers associated with technical questions. Join PCA to participate in our community.
0
No votes yet