Main Menu

bumperette removel

Body and Interior

Vehicle Information: Model: C2 Turbo; Year: 1991; Body Type: Coupe; Engine (type, size, modifications): 3.3; Total Mileage: 38,000;

Chris:Regarding the question convcerning removing the bumperettes on a 964, I just did that to my car.Simple:1. Pop out the center section of the bumperette to expose the 10 mm nuts so the bumperettes can be removed2. Carefully cut off the mounting studs. I used very small cutting disc on a Dremel tool. Get them cut off as close and smooth as possible3. Using some duct tape, position the new lenses in the right spot. Use a 3/64ths drill and drill a hole through the center of the rivit holding the mounting bracket to the bumper cover, using the hole in the new lenses as a guide. Be sure the hole if drilled "level". Be careful!4. I went to a local marine store and bought a selection of SS wood screws ( i think they were 8's but i'm not sure. 3.Use the wood screws to secure the new lenses. Be careful not to overtighten them.RegardsRW

You must log in to view answers associated with technical questions. Join PCA to participate in our community.
No votes yet