Main Menu

eRam Superchrger

Engine

Vehicle Information: Model: 911 SC; Year: 1982; Body Type: Coupe; Total Mileage: 67,000;

Last year I installed a Super eRam description to give the car a little extra pick-up (1-2 lbs of boost) below:(THE SUPER E-RAM is two e-RAMs mounted in series. Total max output is 1400 watts, 100 amps. This configuration still produces 3 lbs. of thrust at 750cfm, but increases the total pressure output to 1.7 PSI (losses due to axial-flow design account for the total pressure being under 2.0 PSI)I attached it to the end of the airbox with the as instructed and have noticed no increase in hp (as I can feel it). If anything, there may be a bit of a drop-off. I've done the best I can to seal the air box and supercharger connection. I also have the unit set to engage at roughly 5,500 rpm (they receommend the higher rpm). Have you heard of anyone using these before? Arethere any concerns that I should have? Is there anything additional that I should do to adjust for the increased air flow? Any comments would be helpful.

You must log in to view answers associated with technical questions. Join PCA to participate in our community.
No votes yet