Main Menu

Sticking Brake


Model: 911L, Year:1968, Mileage:150K, Type of use:Street use only
Ed, I have a 68-911L with a sticking front right brake caliper. The caliper is fine on initial drive out but once the unit begins to heat it will not fully release the rotor causing extreme heat to the pads, rotor and wheel. Once the car sits and the brake unit cools down the caliper releases completely from the rotor and the wheel rotates easily. Before I dismantle the caliper do yo have any ideas as to the cause and any suggestions as to correcting this problem? The brake peddle pressure is good and no other corners seem to be affected.

You must log in to view answers associated with technical questions. Join PCA to participate in our community.
No votes yet