Technical Q&A
To search for questions answered before May 7, 2014, visit our Archives
11.30.2018
944 (1986 – 1991) | Body
1988 944 82 500 Body camarillo California 944 rear latch key wouldn't open, key works ignition, glove box & doors.. high beam left side not working?? Any ideas as to why 0 No votes yet
10.19.2018
911 (1984- 1989) | Electrical and Electronic
1988 911 Carrera Targa 170 000 Electrical and Electronic Hampton Cove Alabama Not a question but may be helpful. In issue 738 page 132 there's a question about a 1986 911: Quits running. My...
10.12.2018
944 (1986 – 1991) | Other
1988 944 Turbo 58 000 Other Charlotte North Carolina Airbag light comes on whether the car is warm or cold. I can't find new replacements due to the age of the airbags. Is it recommended that...
09.30.2018
911 (1984- 1989) | Engine
1988 911 Carrera Cabriolet 100 000 Engine Ivins Utah My 1988 911 is in really good shape and runs pretty well except when it's driven at slow speeds. Either warm or cold she idles fine at 900...
09.27.2018
911 (1984- 1989) | Other
1988 911 Carrera Targa Other Los Angeles California How do I find out about PCA Autocross events near me? (socal) 0 No votes yet
09.12.2018
944 (1986 – 1991) | Transmission
1988 944S 200 000 Transmission Beaverton Oregon Is there any particular way the flywheel needs to be oriented when replacing the clutch on a 1988 944S (16V)? I've seen articles that say the...
09.08.2018
911 (1984- 1989) | Electrical and Electronic
1988 911 Carrera Cabriolet 90 000 Electrical and Electronic Weslaco Texas Hi Chris, I am wondering if the cylinder sensor is bad on my 1988 911? The car starts perfect until i drive further than 15...
08.20.2018
924S (1987 – 1988) | Electrical
1988 924S 65 000 Electrical Vandalia Illinois After driving the car it will not crank until it cools back down...I can jump it and it starts right up...I can then shut it off and try it again and it...
05.29.2018
944 (1986 – 1991) | Engine
1988 944S 200 000 Engine Beaverton Oregon I'm going at a slow pace in doing my clutch job, so I'm worried that whatever lube I use when I replace the rear main seal might not be effective...
03.08.2018
924S (1987 – 1988) | Interior
1988 924S 124 000 Interior Seattle Washington Can the rear quarter interior panel P/N 944-555-021-16-05T be fit into a 924S? I know the window moulding is different- the 924S has the rubber window...
